使用电动高空工作平台的注意事项？

使用电动高空工作平台的注意事项？

1, the use of the unit should arrange for a person to operate the lift, on their own unit situation to develop the details

of the use of the lift notes, and hanging in a conspicuous position. The driver should be trained and assessed by the statutory management department and

obtain an induction certificate before engaging in the operation of the platform.

1、使用单位应安排专人操作升降机，根据本单位情况制定使用细节，并悬挂在显眼位置。驾驶员在从事平台运营前，应当经过法定管理部门的培训和考核，并取得入职证书。

2, the driver in the daily work before the first carefully check the platform electrical system, hydraulic system and mechanical system is normal,

and the platform up and down unloaded trial several times, check for faults and abnormalities, but also pay attention

to the platform platform platform stop layer station accuracy there is no abnormal gap.

2、驾驶员在日常工作前首先仔细检查站台电气系统、液压系统和机械系统是否正常，并对站台上下卸载进行多次试管，检查是否有故障和异常，还要注意站台站台停板层工位精度有无异常间隙。

3, the driver will work before the guardrail at both ends of the activity door closed and locked after ringing the bell to start,

is strictly prohibited in the guardrail activity door open situation work. In the platform driving in case of emergency stop switch can be used to stop the platform,

but in normal operation, it is prohibited to use the emergency stop switch to stop.

3、驾驶员在工作前将活动门两端的护栏关闭并锁好后按响铃开始工作，严禁在活动门打开的情况下工作。

在月台行驶中发生急停开关时，可以使用停机开关来停车，但在正常运行中，禁止使用急停开关来停车。

4, lifting platform line failure or loss of normal work, should notify the maintenance staff to repair, such as found to be dangerous or may cause personal mechanical accidents,

should immediately stop using, cut off the total power supply in the machine room, report to the management, to be restored and a detailed inspection before use

4、升降平台线路故障或丧失正常工作时，应通知维修人员进行维修，如发现有危险或可能造成人身机械事故，

应立即停止使用，切断机房内总电源，向管理部门报告，待修复后，使用前进行详细检查

5, the driver in the lifting platform work is strictly prohibited to leave the post and the platform for wiping, lubrication or repair work.

When the work is completed, the driver should cut off the power supply, lock the control panel before leaving the post, and fill in the handover records.

5、司机在升降平台工作时严禁离开岗位及平台进行擦拭、润滑或修理工作。工作完成后，司机应切断电源，锁好控制面板后方可离岗，并填写交接记录。

6, the driver should be responsible for supervising the platform transportation of goods on the platform as evenly distributed

as possible to prevent bias load, truck-mounted lifting platform manufacturers and prohibit the load more than transport.

The lift is not allowed to carry people and transport flammable and explosive dangerous goods and prohibit people from climbing and artificially shaking when it is raised.

6、司机应负责监督平台运输的货物在平台上尽可能均匀分布，防止偏载，车载升降平台厂家禁止载重超过运输。

升降机不允许载人、运输易燃易爆危险品，升降机升起时禁止人员攀爬和人为摇晃。